Skip to main content.

Materials Selection

With over 45 years of injection molding experience, we've molded parts from many different material types.  Each thermoplastic material has it's own unique set of parameters for injection molding.  Our Scientific Injection Molding approach to process development allows us to establish the right process for your material and application to ensure that minor material variations don't result in major quality variations.  Our experience with such a large range of thermoplastic materials allows us to quickly identify potential pitfalls that might be unique to your material selection and proactively overcome them early in the project rather than being stuck in a reactive state after the first tool sampling.

A sampling of some of the material grades we have run is below, but is by no means an all inclusive list.  Contact a Wabash Engineer today!

ABS - Acrylonitrile Butadiene Styrene 
AES - Acrylonitrile Ethylene Styrene 
ASA - Acrylonitrile Styrene Acrylate
COP - Copolyester
CPVC - Chlorinated Polyvinyl Chloride
HDPE - High Density PolyEthylene
GPPS - General Purpose Polystyrene
PA - Polyamide (Nylon)
PBT - Polybutylene Terephthalate
PC - Polycarbonate
PET - Polyethylene Terephthalate
PMMA - Polymethyl Methacrylate (Acrylic)
POM - Polyoxymethylene (Acetal)
PP - Polypropylene
PPS - Polyphenylene Sulfide
PS - Polystyrene
PSU - Polysulfone
PU - Polyurethane
PVC - Polyvinyl Chloride
SAN - Styrene Acrylonitrile
TPE - Thermoplastic Elastomer
TPO - Thermoplastic Polyolefin

Additional injection molding Capabilities

CONTACT US FOR AN ESTIMATE

Our engineers are standing by to assist with your project.

REQUEST AN ESTIMATE